How does AI use water?

Water is used in AI Data Centers in the form of de-ionised form to cool down its servers.

AI primarily uses water (in de-ionised form) to cool down its servers. AI servers generate a lot of heat during operation, which can damage components if they aren’t cooled.

De-ionised water is much cheaper (less than $0.2 per litre in India) than many other commercially available coolants. Other coolants such as those used in vehicle radiators may cost up to $5 per litre depending upon the region.

Why doesn’t water cause any short circuits in AI servers?

Water as a coolant in most electronics is used in deionised form, which has zero electrical conductance but retains much of its thermal conductivity. Meaning, it does not conduct electricity, but it conducts heat.

Here is a brief comparison of tap water (ionised) and de-ionised water.

  • Tap Water (ionised)
    • Thermal Conductance: ~0.591–0.598 W/(m·K) (at 20 °C)
    • Electrical Conductance: ~200–800 µS/cm
  • De-ionised Water
    • Thermal Conductance: ~0.598 W/(m·K) (at 20 °C)
    • Electrical Conductance: ~5 µS/cm if exposed to air
  • Ocean Saltwater
    • Thermal Conductance: ~0.60 W/(m·K) (at 25 °C, ~35 g/kg salinity)
    • Electrical Conductance: ~50,000 µS/cm (50 mS/cm)

By comparison, we see that deionised water conducts upto 800 times less as compared to tap water.

How much water does AI use globally?

Data from Ekopak indicate that AI servers might utilise somewhere between 300 and 700 billion litres of water, roughly equivalent to 10% of the water stored in the Hoover Dam.

For early models like GPT-3 or GPT-4, it was estimated that generating every 100 words uses about 500 ml of water.

For a single one-sentence AI prompt, the water needed sits approximately at 1.5 litres, assuming each prompt generates around 1500 words.

Frequently Asked Questions

1. Does AI use freshwater or saltwater?

AI servers use de-ionised fresh water. Although they can use saltwater, it is generally not used. Salt water is more expensive to de-ionise than fresh water.

2. Does AI use water from the ocean?

No, it does not use water from the ocean to cool its servers because saltwater is more expensive to de-ionise, which is the water AI servers need to prevent electrical short circuits. Ocean saltwater has a very high conductance of 4 to 5 S/m.

Disclaimer: By continuing on this platform, you agree to our Privacy Policy, Disclaimers, and Terms and Conditions.

Dhirendra Das
Dhirendra Das

Dhirendra is a professional contributor for digital publications, having published over 5 million words across his 9 years of experience. He has done his MBA from Jain University and Bachelor of Technology from Veer Surendra Sai University of Technology.

Articles: 4